ProForm 890 E Elliptical Скачать руководство пользователя

Страница: 18 / 32

HOW TO TURN ON THE POWER

IMPORTANT: If the elliptical has been exposed to

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

do this, you may damage the console displays or

other electrical components.

Plug in the power cord (see

HOW TO PLUG IN THE

POWER CORD on page

14). Next, locate the

reset/off switch on the frame

near the power cord. Make

sure that the reset/off switch

is in the reset position.

The display will then light and the console will be

ready for use.

Note: When you turn on the power for the first

time, the ramp will calibrate automatically.

The

ramp will move upward and downward as it calibrates.

When the ramp stops moving, the ramp is calibrated.

IMPORTANT: If the ramp does not calibrate auto-

matically, see HOW TO CALIBRATE THE RAMP on

page 22 and manually calibrate the ramp.

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

See HOW TO TURN ON THE POWER above.

2. Select the manual mode.

Each time you turn

on the console, the

manual mode will

be selected. If you

have selected a

workout, reselect

the manual mode

by pressing any of

the Workouts but-

tons repeatedly

until zeros appear in the display.

3. Change the resistance of the pedals and the

incline of the ramp as desired.

As you pedal,

change the resis-

tance of the pedals

by pressing the

Resistance

increase and

decrease buttons.

Note: After you press the buttons, it will take a

moment for the pedals to reach the selected resis-

tance level.

To vary the motion

of the pedals, you

can change the

incline of the ramp.

To change the

incline, press one

of the numbered Quick Ramp buttons.

Note: After you press the button, it will take a

moment for the ramp to reach the selected incline

level.

4. Follow your progress with the display.

The lower left

display

—This dis-

play can show the

elapsed time and

the distance (total

number of revolu-

tions) that you have pedaled. Note: When a

workout is selected, the display will show the time

remaining in the workout instead of the elapsed

time.

The lower right

display

—This dis-

play can show your

pedaling speed (in

revolutions per

minute) and the

approximate number of calories that you have

burned.

This display also shows your heart rate when you

use the handgrip pulse sensor (see step 5 on page

19).

Reset

Position

Содержание 890 E Elliptical

































Результаты поиска

Содержание 890 E Elliptical

Отзывы:

Похожие инструкции для 890 E Elliptical

Бренды по названию

Популярные бренды

ProForm 890 E Elliptical, Руководство пользователя

Результаты поиска

Содержание 890 E Elliptical

Отзывы:

Похожие инструкции для 890 E Elliptical

Бренды по названию

Популярные бренды