ProForm 890 E Elliptical Скачать руководство пользователя

Страница: 14 / 32

HOW TO USE THE ELLIPTICAL

HOW TO PLUG IN THE POWER CORD

This product must be grounded.

If it should mal-

function or break down, grounding provides a path of

least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug.

Plug the power cord

into an appropriate

outlet that is prop-

erly installed and

grounded in accor-

dance with all local

codes and ordi-

nances. This product

is for use on a nomi-

nal 120-volt circuit.

IMPORTANT: The elliptical is not compatible with

GFCI-equipped outlets and may not be compatible

with AFCI-equipped outlets.

A temporary adapter may be used to connect the

power cord to a 2-pole receptacle as shown at the

right if a properly grounded outlet is not available. The

temporary adapter should be used only until a prop-

erly grounded outlet can be installed by a qualified

electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in

place by a metal screw.

Some 2-pole receptacle out-

let box covers are not grounded. Contact a

qualified electrician to determine if the outlet box

cover is grounded before using an adapter.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical

rocks slightly on

your floor during

use, turn one or

both of the level-

ing feet beneath

the rear stabi-

lizer until the

rocking motion is

eliminated.

If the frame of

the elliptical

flexes during

use, turn the

center leveling

foot until the

flexing motion is

eliminated.

DANGER:

Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet installed

by a qualified electrician.

Grounded Outlet Box

Adapter

Lug Metal Screw

Grounding Plug

Power Cord

Outlet

Leveling

Feet

Leveling

Foot

Содержание 890 E Elliptical

































Результаты поиска

Содержание 890 E Elliptical

Отзывы:

Похожие инструкции для 890 E Elliptical

Бренды по названию

Популярные бренды

ProForm 890 E Elliptical, Руководство пользователя

Результаты поиска

Содержание 890 E Elliptical

Отзывы:

Похожие инструкции для 890 E Elliptical

Бренды по названию

Популярные бренды