ProForm 6.0 Zt Treadmill Скачать руководство пользователя

Страница: 20 / 28

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and

follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION:

a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 12.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

treadmill frame near the power cord. If the switch

protrudes as shown, the circuit breaker has tripped.

To reset the circuit breaker, wait for five minutes

and then press the switch back in.

PROBLEM: The power turns off during use

SOLUTION:

a. Check the reset/off circuit breaker located on the treadmill frame near the power cord (see the

drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch

back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION:

a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 17 to turn off the demo mode.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The displays of the console do not function properly

SOLUTION:

a. Remove the key from the console and

UNPLUG THE

POWER CORD.

Next, remove the two #12 x 1 1/4"

Screws (4) and the two #8 x 3/4" Hood Screws (65)

and carefully remove the Motor Hood (1).

Tripped

Reset

Содержание 6.0 Zt Treadmill





























Результаты поиска

Содержание 6.0 Zt Treadmill

Отзывы:

Похожие инструкции для 6.0 Zt Treadmill

Бренды по названию

Популярные бренды

ProForm 6.0 Zt Treadmill, Руководство пользователя

Результаты поиска

Содержание 6.0 Zt Treadmill

Отзывы:

Похожие инструкции для 6.0 Zt Treadmill

Бренды по названию

Популярные бренды