ProForm 590e Elliptical Скачать руководство пользователя

Страница: 16 / 28

The upper

display

—This dis-

play can show the

elapsed time, the

distance that you

have pedaled, your

pedaling speed, and the approximate number of

calories you have burned.

Press the Display button repeatedly until the upper

display shows the information that you are most

interested in viewing. Note: While information is

shown in the upper display, the same information

will not be shown in the lower left or lower right dis-

play.

The lower

display

—This dis-

play will show a

track representing

640 revolutions (1/4

mile or 400 meters).

As you exercise, indicators will appear in succes-

sion around the track until the entire track appears.

The track will then disappear and the indicators will

again begin to appear in succession.

To change the volume level of the console, press

the Vol increase and decrease buttons.

5. Measure your heart rate if desired.

If there are sheets

of clear plastic on

the metal con-

tacts on the

handgrip pulse

sensor, remove

the plastic.

measure your

heart rate, hold the

handgrip pulse

sensor with your

palms resting

against the metal contacts.

Avoid moving your

hands or gripping the contacts tightly.

When your pulse is

detected, a flashing

heart symbol will

appear in the dis-

play, and then your

heart rate will

appear. For the most accurate heart rate reading,

hold the contacts for at least 15 seconds. Note: If

you continue to hold the handgrip pulse sensor,

the display will show your heart rate for up to 30

seconds.

If the display does not show your heart rate, make

sure that your hands are positioned as described.

Be careful not to move your hands excessively or

to squeeze the metal contacts tightly. For optimal

performance, clean the metal contacts using a soft

cloth;

never use alcohol, abrasives, or chemi-

cals to clean the contacts.

6. Turn on the fan if desired.

The fan has high and low speed settings. Press

the Fan button repeatedly to select a fan speed or

to turn off the fan.

Note: If the pedals do not move for about thirty

seconds, the fan will turn off automatically.

7. When you are finished using the elliptical

exerciser, the console will turn off

automatically.

See HOW TO TURN OFF THE CONSOLE on

page 15.

Contacts

Содержание 590e Elliptical





























Результаты поиска

Содержание 590e Elliptical

Отзывы:

Похожие инструкции для 590e Elliptical

Бренды по названию

Популярные бренды

ProForm 590e Elliptical, Руководство пользователя

Результаты поиска

Содержание 590e Elliptical

Отзывы:

Похожие инструкции для 590e Elliptical

Бренды по названию

Популярные бренды