9
USER SETTING PROGRAMS :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
Press the UP and DOWN button to select program
(written U1 to U4). Wait until the word PROGRAM
begins flashing. Press the MODE button to validate.
3.Entering your datas
Users are free to edit the values in the order of
TIME, DISTANCE, CAL, and the level of resistance
in 10 intervals. The values and profiles will be stored
in the memory after setup.
To do that, once the program is selected and you
hold the MODE button during 3 secondes, the first
column will be flashing and you’ll use the UP and
DOWN button to create your profile. Press MODE to
validate, you’ll then move on the 2nd column. Again
hold during 3 secondes de MODE buttons to adjust
the level of the colonn. Do the same as before for
the 10 columns. Finally press START/STOP button
to start.
4. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
If the pedal do not move for a few seconds, the word
STOP will appear in the display, and the console will
pause. The console has an “auto-off” feature. If the
pedals do not move and the console buttons are not
pressed for a few minutes, the power will turn off
automatically to save the batteries.
BODYFAT TEST :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
Press the UP and DOWN button to select program
20 (written BODY FAT). Wait until the word
PROGRAM begin flashing. Press the MODE button
to validate. It’s a special program designed to
calculate users’ body fat ratio.
3.Entering your datas
Press “MODE” key to select HEIGHT WEIGHT, AGE
and GENDER. Then, press UP or DOWN button to
adjust the values. After pressing “START/STOP” key
to calculate body fat, please also apply the heart
rate detector appropriately. If the detector cannot
pick up any signals, an error message “Err” will
show up in the profile display. If it happens, press
“START/STOP” key to calculate again. Then, the
body Fat will be shown in the display.
