DELETE
one-tounch and two-touch memories
By programing a new entry over the old
entry, this old entry will be deleted.
phonebook entries
1. repeat the above steps 1 to 5 of the
instructions how to dial a number
2. press momentarily , the display
shows “DEL ?”
3. press again to delete the entry
CALLER-ID
FUNCTIONING:
Just before or short after the first ring,
the Telephone Company sends the telep-
honenumber (DTMF system) or name +
number (FSK system) of the person who
is calling to you. This can also be the
telephonenumber of a fax or of a mobile
phone.
On receipt of this information, the display
of the TX-250 shows this name/number
combination and stores it into its
memory.
Because this information is stored in
memory, at any time you can see who
called you and at what time and day.
The display indicates how many calls
are in memory and how many calls are
received after the last time you viewed
the numbers.
Please note that you must subscribe
yourself for Caller-ID. Contact your pro-
vider.
MEMORY:
The memory can hold 92 incoming calls
(n names). When the memory
is full, each new incoming call will over-
write the oldest call. Please make sure to
regular read the memory and to delete it
contents.
NAME:
In case you receive a call from someone
which name and number you have stored
in the phonebook memory of the
TX-250, then the name you programmed
in your telephone will come on the dis-
play. Else the name which is transmitted
from the provider will be displayed.
In case the provider only sends the num-
ber and you have not stored this number
in your telephone, than only the number
will come on the display.
CALL WAITING:
In case you have a TX-250CW, than the
number & name of the second caller will
also come on your display.
REPEATED CALL:
A repeated call will be displayed as
“REPEAT” in the display. The information
concerning the first call will be lost, only
the time and date of the last call will be
memorized.
TIME/DATE:
The time and date of each call are memo-
rized too. In case your provider uses the
FSK Caller-ID system, the network provi-
des the time/date information. In case of
DTMF, the time/date of the internal clock
of the TX-250 will be used.
21
