Profoon TX-115, Руководство пользователя

Страница: 9 / 17

DECLARATION OF NETWORKCOM-
PATIBILITY
The Profoon TX-115 is designed for
use on the ‘public switched telephone
networks (analogue single-line)’ of
telephone- and cable-companies
inside the EU.
Each country and/or provider might
require a different telephoneplug.
The Profoon TX-115 complies with the
essential requirements and provisions
as described in the European
Directive 1999/5/EC.
DECLARATION OF CONFORMITY
The declaration of
conformity is avai-
lable on the web-
site WWW.PROFOON.COM
INSTALLATION
TELEPHONECORD & HANDSET-
CORD:
1. connect the handset with the base
2. connect the telephonecord to the
backside of the telephone; push
the connector till you hear a click
3. plug the telephone plug into your
telephone outlet
WALL MOUNT:
1. drill two holes in the wall with a
distance of 7cm and insert two
screws; let the heads of the screws
stick out a few millimeters
2. remove the handsetholder, rotate it
180° and replace it; this holder will
hold the handset
3. hang the unit on the wall and fixate
the telephone wire by means of
cable-clips
HOW TO USE
INCOMING CALL:
Lift the handset and start the conver-
sation.
OUTGOING CALL:
Lift the handset. Wait for the dial tone
and key-in the desired telephone
number. Replace the handset when
the conversation is over.
REDIAL:
In case the person you were calling
was busy or you want to dial the last
dialed number again, this number is
stored in memory:
1. pick up the handset and wait for
the dialtone
2. press the button P/REDIAL; the
last dialed number will be redialed
This number can be as long as 31
digits.
9
GB