HOW TO USE
INCOMING CALL:
At whish you may switch-off the
acoustic ringer by using the ON/
OFF switch on the bottom side
of the telephone. Lift the handset
and start the conversation. The
ringer-lamp also indicates an
incoming call.
OUTGOING CALL:
Lift the handset. Wait for the
dial tone and key-in the desired
telephone number. Replace the
handset when the conversation
is over.
REDIAL:
In case the person you were cal-
ling was busy or you want to dial
the last dialed number again, this
number is stored in memory:
1. pick up the handset and wait
for the dial tone
2. press the button
; the last
dialed number will be redialed
This number can be as long as
32 digits.
R-BUTTON:
Use the R-key to activate special
services from your telephone-
company or to transfer a call in
case you are connected through
a PABX. The FLASH time of this
feature is 100mS.
TELESERVICES:
The buttons * and # are function
buttons, needed for divers tele-
com services (tele shopping, tele
banking, etc) or to control divers
telecom devices (PABX, answe-
ring machines, etc). Refer to the
concerning manual.
MUTE:
Press
to temporary switch-
OFF the handsets microphone;
release this button to resume
with the conversation.
RECEIVER VOLUME CONTROL:
The receiver volume control
(- ) enables you to
adjust the receiver volume.
9
