Profoon PDX-5200 series, Руководство пользователя

Страница: 28 / 46

* make a new intercom call while you are on an outside call
* shuttle between an outside call and an intercom call
* transfer an outside call from one handset to another
* set up a three-way conference call between yourself, an outside call and an
intercom call
Each handset has its own number - 1, 2, 3, 4 or 5 - which is shown on the right-
hand side of the display.
You can change each handset's name from "PROFOON" to a name of your choi-
ce, as described on page xx.
Please note:
- Among the handsets registered to a single base unit, only one outside call
and two intercom calls can take place at once.
- If you try to make an outside call while another handset is already on the line,
you will hear Busy tone.
- If you try to make an intercom call when one is already in progress, you will
hear Busy tone.
- When one handset has taken the outside line, the EXT symbol will appear on
the displays of all other handsets.
Registering new handsets:
If you have a Twin, Triple or Quad system, all the handsets supplied with your
base unit are already registered to it - the first one as handset number 1, the
second as number 2, etc. You won't need to re-register them unless you have a
problem.
If you've bought extra handsets separately, you'll need to register each one to
your original base unit.
To register a handset:
1. Press and hold the handset locator button on the base unit ( ) for about 3
seconds, until you hear two short beeps and the green IN USE light flashes
You now have 3 minutes in which to register the handset.
2. Press the MENU button, the display shows "REGISTER"
(If the display does not show register at this point, press the xx button until it
does.)
3. Press the OK button. the display shows: "BS 1 2 3 4"
These are the base station numbers. Any number that is flashing is already
in use for a base station.
4. Key in a base unit number that is not flashing
5. The display shows "PIN"
6. Key in your PIN (default 0000) and press the
OK button
The display shows "SEARCH". After a few moments, when the handset
finds the base unit, a number* appears on the display.
7. Press the OK button to confirm registration
28