14
2.
The
Firmware Update
section, allowing users to flash the firmware of the connected
ProfiShark 10G with a locally stored version. The ProfiShark 10G is unavailable during
the firmware update process, which can take up to several minutes to complete. Once
finished, the ProfiShark 10G may need to be replugged for the new firmware to take
effect. Do not disconnect the USB port or shut the computer down during the update
process. The latest firmware can be downloaded from the Resource Center at:
www.profitap.com/resource-center/
The version of the logic board inside the ProfiShark device.
A unique identifier encoded into the ProfiShark device.
The status of both SFP+ modules: Present, Not Present.
Represents the amount of packets dropped by the driver in
Live
Capture
mode.
Represents the number of packets dropped due to low USB
Bandwidth, or when attempting a 10 Gbps capture without any
configured filter.
HW FIRMWARE
VERSION
MAC ADDRESS
MODULE
SOFTWARE
DROPPED
PACKETS
HARDWARE
DROPPED
PACKETS
▶
Note:
The ProfiShark Manager will search for a new firmware release online
every time it starts, allowing a new revision to be downloaded and installed,
without the need of a locally stored update.
