ProfiTap C1P-1G, Руководство по эксплуатации продукта

Страница: 8 / 16

5
1.7.4 Battery Error
No battery
The BATT LED is off if the battery is invalid or not present.
Battery life suboptimal
If the battery takes less than 1 hour to discharge (measured at a full discharge cycle), the
BATT LED turns red after the reboot. The TAP keeps that state until the battery is replaced. In
this error state, the TAP and battery still operate normally.
Replace the battery to ensure optimal performance.
Refer to the Battery replacement chapter (1.7.6).
1.7.5 TAP
The Battery TAP is similar to other C1-1G TAPs. It provides the same features and is based on
the same hardware and software.
1.7.6 Battery Replacement
THE TAP MUST BE POWERED ON DURING THIS OPERATION.
1.
Remove the battery drawer screw at the back of the TAP