18
PSI01000-001_v01
Ironing
Always follow the ironing instructions on the garment’s care label.
FILLING THE IRON WITH WATER
●
Unplug the unit.
1
Set the
steam switch (9)
in position
.
2
Carefully open the
water tank lid (3)
.
When opening the water tank lid, make sure you do not pull out the steam
burst button!
3
Using the supplied
water cup (12)
, fill the
tank (4)
with water below the
“max”
level.
When adding water to the tank, tilt the iron slightly lifting its tip upwards,
so that water can flow into the tank.
For best ironing results, it is recommended to use fresh demineralised
or distilled water.
Do not use chemically descaled water or any other liquids.
Never exceed the ‘max’ level marked on the side of the water tank.
4
Close the
Water Tank Cover (3)
.
DRY IRONING
●
Unwind and straighten the
Power Cord (5)
.
1
Press the
lock button (6)
and unfold the
handle (1)
.
2
Set the
voltage selector switch (7)
to correct voltage in the country where the iron is
used.
3
Plug the
power cord (5)
into a power source.
4
Set the
steam switch (9)
in position
.
5
Turn the
Temperature Dial (8)
to “○”, “○○” or “●●●”.
6
The
Heater Light (11)
will come on.
B
C
