SQIM 5976-5977-5978-7926 01-03-19 V7 | SQ Professional Ltd © 2019 All rights reserved
Dainty
™
Legacy Kettle Instruction Manual
CARE & MAINTENANCE
SWITCHING ON
1
Place the kettle on the base unit . Make sure that the kettle is
locked on to the 360˚ connector, which allows the kettle to
be put in any position (ideal for left and right handed users).
2
Plug the stand into a power socket (switch the socket on, if it
is applicable).
3
Switch the kettle
ON
. The water level indicator will light up
and the kettle will start heating up the water.
SWITCHING OFF
1
Once the water is boiled the kettle will automatically
switch off.
2
Lift the kettle from the base unit and hold it level to avoid
splashing the hot water. To boil the water again, place it back
on the base unit and switch to
ON
again (wait for a minute
after the kettle has switched off before switching it on again).
3
If there is not enough water in the kettle or if it is empty, it
will switch the power off automatically. To switch it back on,
refill the kettle and wait a few minutes for it to cool down.
Then use as normal. Using insufficient water will shorten the
life of the appliance.
CARE & MAINTENANCE
BEFORE CLEANING ALWAYS CHECKTHAT THE KETTLE IS SWITCHED OFF
AND HAS COMPLETELY COOLED DOWN.
1
Unplug the base unit (switch the socket off first, if
applicable) and let the kettle cool completely.
2
Wipe the kettle, inside and out, with a damp cloth. Do not
use abrasive cleaners on the outside of the appliance to avoid
scratching the surface.
3
Ensure that all connectors and sockets are completely dry.
DESCALE - EVEN IN SOFT WATER AREAS
1
This appliance is fitted with concealed heating element
and must be descaled regularly. The frequency of descaling
depends on usage and water hardness. Excessive scale
causes overheating, reduces the kettle’s life, and may trigger
the boil-dry cut-out, as well as damage to the element which
invalidates the warranty.
2
Use appropriate descaling product suitable for stainless steel,
glass or plastic and follow the provided instructions carefully.
3
Products returned under warranty with faults due
to scale will be subject to a repair charge.
WIRING
This appliance must be earthed. Should
the power cable or the power plug
become damaged, arrange for these
to be replaced by Customer Service
or qualified person before continuing to use the
appliance. This appliance is fitted with a 13A BS1362
fuse in a 13A BS 1363 plug.
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to
hazardous substances in electrical and electronic goods,
appliances marked with this symbol must not be disposed of with
unsorted municipal waste, but recovered, reused or recycled.
SERVICE
The product is not user-serviceable. If it is not working, read the
instructions, check the plug fuse and main fuse/circuit breaker.
If it is still not working, consult your retailer. If that does not solve
the problem – ring Customer Service – they may be able to offer
technical advice. Please have the
Model Number
to hand, as they
will not be able to help you without it. If you are advised to return
the product to us, pack it carefully, include a note with your name,
address, day phone number, and description of the problem. If
under a warranty, say where and when it was purchased and
include a valid VAT receipt. Send it to SQ Professional Ltd.
WARRANTY
THE WARRANTY FOR THIS PRODUCT IS COVERED BY SQ PROFESSIONAL
LIMITED. ANY FAULTS WITH THIS PRODUCT ARISING THROUGH A
MANUFACTURER DEFECT WILL BE COVERED FOR 1 YEAR FROM THE DATE
OF PURCHASE, SUBJECT TO A VALID VAT RECEIPT BEING PRESENTED. THIS
DOES NOT INCLUDE FAULTS OR DAMAGE CAUSED BY MISUSE OF GENERAL
WEAR AND TEAR.
PLEASE CONTACT CUSTOMER SERVICES ON
01992 716 070
OR SEND AN
E-MAIL TO
, MONDAY TO FRIDAY FROM
09:30 - 17:30. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Enfield, EN3 7XQ
T:
01992 716 070
| F:
01992 700 538
|
WWW.SQPROFESSIONAL.COM
