Professional Series PS-IM269, Руководство пользователя

Страница: 6 / 18

When the indicator of this button turns to red, it means insufficient
water to water reservoir, you need to add enough water and press
POWER button to restart the machine.
When the ice reach to the max storage capacity, the indicator of this
button will flash, and the machine will stop working. What you need
to do is pouring out the ice, if the position of ice is lower than the
position of ice bin full sensor, the machine will restart automatically.
OPERATING INSTRUCTIONS
Note: Water reservoir and pipeline should be well cleaned before use.
Step 1. Plug out, and clean the water reservoir by adding water, then take
plastic plug away to drain out the water from water reservoir.
Step 2. Reinstall the plastic plug and add appropriate clean water. After connecting
the power supply well, press and hold "SELECT" button for 3 seconds to
activate pipeline self-clean process. After cleaning, drain out the water by
taking plastic plug away.
Step 3. Open the lid and take out the ice basket to add appropriate water into
water reservoir.
Note: The water poured into water reservoir should be lower than the water
reservoir’s MAX position. When water volume goes beyond the max,
please open the bottom water drain plug to drain the spare water out. Then
close the transparent lid.
Step 4. Select the desired ice size, the default size of machine is large one.
Note: Please select the (S) when ambient temperature is below 15°C.
When the ambient temperature is higher than 30°C, Large ice cube
sizes are recommended.
Note: For the first three cycles, the ice may be small and irregular in size.
Note: When the ice collecting tray is full please remove the ice immediately,
do not allow the ice collecting tray to overfill.