25
Battery charger
The supply voltage must correspond to the voltage indicated on the type plate of the
rapid charger.
Always inspect the battery charger, cord and plug before use.
Protect the battery charger from moisture and only use it in dry areas.
The charger supplied is only suitable for charging batteries.
a) Plug the battery charger into the power outlet.
b) The green light will illuminate to indicate that power is connected.
c) Slide the battery into the charger as shown in Fig.1.
d) When charging the battery, the green light will remain lit and the red light will
continue to flash.
e) Both green and red lights will remain lit when the battery is fully charged.
Fig. 1
Installing and removing the battery
WARNING! Do not operate the variable speed on/off trigger while inserting the
battery.
a) Insert the battery into the battery slot on the product until it clicks into place.
b) Do not use excessive force when inserting the battery. If the battery does not
slide in easily, it will not be inserted correctly and may be damaged.
c) Press the battery release button to remove the battery.
Inserting/replacing the saw blade
WARNING! Remove the battery before inserting or replacing the blade.
1. Set the cutting depth to the minimum position, 0 mm.
2. Fold back the blade guard using the release lever (11) and set the unit down.
3. Press the spindle lock button (17) (until it clicks) and use the Allen key to
unscrew the locking screw (6). Now remove the locking screw and the locking
flange (7).
4. Remove the saw blade (8).
5. Installation of the saw blade is done in reverse order.
6. Press the spindle lock button (until it clicks) and use the Allen key to unscrew
the locking screw / flange.
WARNING! The arrow on the saw blade
must match the arrow indicating the
direction of rotation. (Direction of rotation
indicated on the saw blade guard.
Make sure the saw blade is suitable for the
rotational speed of the tool.