Produal 6001TRC-P, Руководство пользователя, Страница: 21 / 34

Produal Oy
Copyright © 2020 Produal Oy - All rights reserved - 07/2020
PS 6001TRC-P - 21/34
Web-site: www.produal.com
Enquiries: T: +358 10 219 9100 E: info@produal.fi
Mode Button COMFORT / ECO / OFF / BOOST Button Mode
Operation Mode 0 = Active (Default)
1 = Indication Only
FAN, BOOST, TIMES
Parameter Name
Description Range
ALARMS
Parameter Name
Description Range
Alarm 1 Source Source for the Alarm Display 0 = CO2 Sensor
1 = Room (Temperature)
2 = Humidity
3 = None (Default)
Alarm 1 Amber Threshold Alarm 1 Amber Backlight Switching Point 0..5000 (Default 0)
Alarm 1 Red Threshold Alarm 1 Amber Backlight Switching Point 0..5000 (Default 0)
Alarm 1 Hysteresis Hysteresis for Alarm 1 0..5000 (Default 0)
Alarm 2 Source Source for the Alarm Display 0 = CO2 Sensor
1 = Room (Temperature)
2 = Humidity
3 = None (Default)
Alarm 2 Amber Threshold Alarm 2 Amber Backlight Switching Point 0..5000 (Default 0)
Alarm 2 Red Threshold Alarm 2 Amber Backlight Switching Point 0..5000 (Default 0)
Alarm 2 Hysteresis Hysteresis for Alarm 2 0..5000 (Default 0)
SYSTEM
Parameter Name
Description Range
Address Modbus Address (Only Modbus versions)
BACnet MAC Address (Only BACnet versions) 0..247 (Default 1)
0..127 (Default 1)
Baud Rate (Only Modbus/BACnet versions) Modbus / BACnet Baud Rate 0 = 9600 (Default)
1 = 19200
2 = 38400
3 = 57600
4 = 76800
Parity (Only Modbus/BACnet versions) Parity 0 = None (Default)
1 = Odd
2 = Even
Stop Bits (Only Modbus/BACnet versions) Stop Bits 0 = 1 Stop Bit (Default)
1 = 2 Stop Bits
Device ID (Only BACnet versions) BACnet Device ID 0..4,194,303
(Default Auto=651001)
Service Pin (Only BACnet versions) Bacnet Service Pin (when activated the device
sends BACnet I-AM message) 0 = Disabled (default)
1 = Enabled
Brightness Backlight Brightness 0..20 (default 5)
Show Unit Swap Shows the Fahrenheit / Celcius Unit Selection
Button 0 = Disabled (default)
1 = Enabled
Lock Mode Lock Operation 0 = Disabled (default)
1 = On /Off Only (Lights & Blinds)
2 = Temp Adjust Only Available
3 = No Input - All Buttons Disabled
Lock Code Lock Mode Password 0000 - 9999 (default 0000)
Maintenance Code Maintenance Mode Password 0000 - 9999 (default 6666)
Staff Code Staff Page Password - Access Password to Further
Settings Screen 0000 - 9999 (default 0000 =
disabled)
Language Language EN = English (Default)
FR = French
Native Units (Defaults) Selects either Fahrenheit / Celsius as Native Units
NOTE: RELOADS DEFAULTS C = Celsius (default)
F = Fahrenheit
Auto Daylight Savings Automatic Summer/Winter Time Adjustment 0 = Disabled (default)
1 = Enabled
Screen Cycle Speed Cycle Speed of Measurements in the ACTION RING
Fast = 4.3 secs, Medium = 7.8 secs, Slow = 10.8
secs 0 = Fast
1 = Medium (default)
2 = Slow
Screen Refresh Rate Refresh Rate of the LCD Screen 0 = Fast (default)
1 = Medium
2 = Slow