Page 28 | 49
8.3
General usage of the Display and 4-Key user interface
The Dumo is equipped with a 4- Digit, 7- Segment display, 2 magnetic switched (option) and 6 key buttons. The
optional magnetic switches are placed alongside the front-panel LED’s whereas the push buttons are inside the
connection area below the circular threaded plug.
Figure 17: Front view of display
Figure 18: Bottom view of buttons
In normal operation the instrument will show the measurement value.
When
+
is pressed, the instrument goes to the parameter display/change mode.
The cursor position is indicated with a blinking number.
To increment the value of the blinking number press
+
To shift the cursor to the right press
→
To save the changed parameter press
տ
. After saving the changed parameter will come into effect and
the cursor will go to D0
To exit and return to show measurement values press
←
or wait for timeout
To test the display and LED press in normal operation mode the keys
+
and
←
at the same time.
+
→
տ
←
MODE
Autosetup
Содержание Sintrol Dumo
Страница 45: ...Page 45 49 15 Appendix 15 1 ISO 9001 certificate ...
Страница 46: ...Page 46 49 15 2 MODBUS RTU register map ...
Страница 47: ...Page 47 49 ...
Страница 48: ...Page 48 49 ...