19
Before each ride
Check houses for signs of wear. Squeeze the brake lever firmly and check for proper brake function. Check pads for wear
and replace if necessary. Ensure rotors are free of foreign substances and oils.
Pad Break In and Noise
It may take anywhere from 20 to 40 complete stops to break in Avid pads. You may begin to notice an increase in
braking power after the first ride. Brake noise can occur not only during the break-in period but off and on throughout the
life of the brake pads. Noise is dependent upon factors such as brake setup, rider weight, riding style, braking style, and
riding conditions (i.e. dust, soil, and contamination of friction surfaces).
Care and Cleaning
Extreme care must be taken when cleaning both the bicycle and its new disc brakes. Under normal use, it is not
necessary to clean the caliper rotor or pads. If necessary, use only water and dish detergent to wash the caliper and
rotor being sure to thoroughly rinse all soap residues from the rotor. Dry with a clean paper towel.
d)
Pad Replacement
A pad should be replaced when its total thickness (backing plate and friction material) is less than 3mm.
