Original operating instructions Procusini® 5.0
If you have any questions, please do not hesitate to contact us at
Page 28from 29
6.3
Packing
The packing function is used to facilitate transport or packing of the unit. Your Procusini® moves back to the
delivery position and thus releases the handle.
7
Troubleshooting
With the Procusini® you have purchased a product that has been designed according to the state of the art and
is safe to operate.
Nevertheless, problems or malfunctions may occur. Therefore, we would like to describe here how
you can eliminate possible malfunctions: Be sure to observe the safety instructions!
After switching on, the 3D printer does not work. The LED on the power switch is not lit and the display is also
dark.
- eck the connection of the power cord.
- eck the power outlet. Is it properly supplied with power?
No food comes out of the dispensing tip despite audible movement of the motor and a movement of the level
indicator:
- eck the dispensing tip for blockages.
- do this, unscrew the dispensing tip and clean it as described in chapter 6.2.2
The Procusini® interrupts the production process for no apparent reason:
- eck the mains connection and the filling level of the cartridge.
- itch off the device and switch it on again after approx. 20 seconds.
The object has missing parts:
- ean the dispensing tip and restart production.
- eck whether the cartridge is sufficiently filled and replace it if necessary.
If the fault persists even after following the troubleshooting instructions, stop using the device and switch it off.
Contact our customer service department immediately at [email protected] for inspection or repair.
For a variety of other tips & tricks as well as recipes, print templates or the latest information on 3D food
printing and the Procusini® food printer, please visit:
www. procusini.com and www.procusini.club
