Page 13
wire won’t stop running until this
trigger
is released
.
5.
“
MIG/MMA/TIG
”
You can adjust the
welding current by turning this knob.
for all welding functions MIG /
MMA / TIG.
6.
Spool Gun Connection
7.
Euro Mig Torch Connector
8.
"+" Output Connector
9.
"-" Output Connector
For Model 511625:
10.
Burn Back Adjustment, sets the
amount of wire that will be burnt
back once weld is complete.
11.
Spot Weld Timer, adjusts the
length of spot weld time.
12.
Soft Start, controls the voltage
supply when the weld is starting
TIG Torch Connect
MMA welding
MIG welding connect
Setting the Gun polarity For Wire type
1. Set for Electrode Positive (GAS) for
gas welding
with solid-core wire
and
the gas supply is needed.
Note: When it is gas welding, you also
should set common Wire feed rolls
2. Set for Electrode Negative (DCEN) for
gasless
flux core wire and this kind
connect don’t need gas supply.
Note: When it is gasless welding, you also
should set the special Wire feed rolls.
Without
tooth in the
groove
With
tooth
in the
groove
NO
GA
S
GAS
