Page 9
Manual for the material you will
weld or cut.
12.
Proper cylinder care.
Secure
cylinders to a cart, wall, or post, to
prevent them from falling. All cylinders
should be used and stored in an
upright position. Never drop or strike a
cylinder. Do not use cylinders that
have been dented. Cylinder caps
should be used when moving or
storing cylinders. Empty cylinders
should be kept in specified areas and
clearly marked “empty.”
13. Never use oil or grease on any
inlet connector, outlet connector,
or cylinder valves.
14.
Use only supplied Torch on this
Inverter Air Plasma Cutter.
Using
components from other systems may
cause personal injury and damage
components within.
15.
People with pacemakers should
consult their physician(s) before using
this product. Electromagnetic fields in
close proximity to a heart pacemaker
could cause interference to, or failure
of the pacemaker.
16.
USE PROPER EXTENSION
CORD.
Make sure your extension cord is in
good condition. When using an
extension cord, be sure to
use
one
heavy enough to carry the current your
product will draw. An undersized cord
will cause a drop in line voltage
resulting in loss of power and
overheating.
We recommend that a
15amp extension cord be used with
the 1.5mm
2
cable. The following
Toolex Industrial Extension Leads
would be suitable 594530 10 metre,
594531 20 metre & 594532 30
metre.
