4
PLG025b
ENGLISH
IMPORTANT:
If you experience discomfort, redness and swelling of the fingers
followed by whitening and loss of feeling, consult your physician before further
exposing yourself to vibration and cold.
!
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY RULES FOR GAS TRIMMERS
DO NOT USE ANY OTHER FUEL
than that recommended in your manual.
Always follow instructions in the Fuel and Lubrications section of this manual.
Never use gasoline unless it is properly mixed with 2-cycle engine lubricant.
Permanent damage to engine will result, voiding manufacture’s warranty.
DO NOT SMOKE
while refueling or operating equipment.
DO NOT OPERATE UNIT WITHOUT A MUFFLER
and properly installed muffler
shield.
DO NOT TOUCH
or let your hands or body come in contact with the muffler.
Hold unit with thumbs and fingers encircling the handles.
DO NOT OPERATE UNIT IN AWKWARD POSITIONS;
off balance, outstretched
arms, or one-handed. Always use two hands when operating unit with thumbs
and fingers encircling handles.
DO NOT RAISE LINE HEAD
above ground level while unit is operating. Injury to
operator could result.
DO NOT USE UNIT FOR ANY PURPOSE OTHER
than trimming lawn or
garden areas.
DON’T OPERATE UNIT FOR PROLONGED PERIODS.
Rest periodically.
DON’T OPERATE UNIT UNLESS DEBRIS SHIELD IS INSTALLED AND IN
GOOD CONDITION.
DON’T ADD, REMOVE OR ALTER ANY COMPONENTS OF THIS PRODUCT.
Doing so could cause personal injury and/or damage the unit, voiding the
manufacturer’s warranty.
DON’T OPERATE YOUR UNIT NEAR OR AROUND FLAMMABLE LIQUIDS
OR GASES
whether in or out of doors. An explosion and/or fire may result.
TURN UNIT OFF BEFORE SETTING IT DOWN.
KEEP HANDLES DRY, CLEAN AND FREE OF FUEL MIXTURE.
KEEP LINEHEAD AS CLOSE TO GROUND AS PRACTICAL.
Avoid hitting
small objects with linehead. When cutting on a slope, stand below linehead.
NEVER cut or trim on a hill or slope, etc if there is the slightest chance of
slipping, sliding or losing firm footing.
CHECK AREA YOU WILL BE TRIMMING FOR DEBRIS THAT MAY BE
STRUCK OR THROWN DURING OPERATION.
KEEP ALL PARTS OF YOUR BODY AND CLOTHING AWAY FROM LINE
HEAD
when starting or running engine. Before starting engine, make sure
linehead will not come in contact with any obstacle.
STOP ENGINE BEFORE EXAMINING TRIMMING LINE.
ALWAYS KEEP THE DEBRIS SHIELD, LINEHEAD, AND ENGINE FREE OF
DEBRIS BUILD-UP.
SPECIFICATIONS
Engine:
Air-cooled, 2-cycle gas
Displacement:
25 cc (1-1/2 cu.in.)
Fuel capacity:
800 ml (27 US fl.oz.)
Trimmer head:
Twin line bump
Drive shaft length:
120 cm (47-1/4”)
Cutting width:
430 mm (17”)
