Proceq ZUA 2000, Инструкция по эксплуатации, Страница: 16 / 20

Page 16
6.3 Reassembling the applicator
All important parts are labelled with digits, matching a part of the serial
number. In case of using several applicators, take care not to mix up these
labelled components.
The parts belonging to the right hand side of the applicator are marked with
white dots, namely:
•
right adjusting wheel (1) – dot at the bottom
•
right side plate (3) – dot at the inner side
•
upper and lower part of the application blade (6)
If the applicator has been entirely disassembled, proceed as follows:
•
Insert the steel reinforcement into the lower part of the application blade (6)
then assemble the lower and upper part of the application blade matching
the white dots.
•
Screw both adjusting wheels (1) and the fixing screw (2) into the application
blade (6) without tightening them. (If necessary, turn back one turn.)
•
Attach the right side plate (3) to the right hand side of the application blade
and fix it with one of the retaining springs (5). The adjustment wheel (1) might
have to be returned to 0 µm in order to insert the retainer spring (5).
•
Add the left side plate (3) likewise.
Store the applicator in the carrying case when not in use in order to avoid
damages to the application surface and the bearing areas of the side plates.