Proceq ZUA 2000, Инструкция по эксплуатации, Страница: 14 / 20

Page 14
6 Maintenance and cleaning
6.1 Maintenance and cleaning work that can be carried out by the user
Only the following maintenance and cleaning work shall be carried out by the user:
•
Disassembling and cleaning the applicator (see chapter 6.2 on page 14).
•
Reassembling the applicator (see chapter 6.3 on page 16).
All other maintenance and repair work shall only be carried out by Zehntner
GmbH Testing Instruments or your authorised Zehntner agent otherwise all
guarantee and liability claims are void.
6.2 Disassembling and cleaning the applicator
The ZUA 2000 must be cleaned immediately after use. Depending on the degree of
soiling it can be partly or totally disassembled:
•
Loosen the fixing screw (2).
•
Return the adjusting wheel (1) to 0 µm.
•
Place the ZUA 2000 on a support base and remove the retaining springs (5)
on both sides, then remove the side plates (3).
•
Clean all parts with water or with a suitable solvent.
Take appropriate safety measures - such as wearing safety glasses - during
disassembling and cleaning.