8
© 2015 Proceq SA
Buttons
Lift the protective visor.
The upper right of the screen there are three buttons
2
(see page 3).
Power On/Off – Press to power on. Press and hold to power off.
Soft Key – Switches in and out of full screen view or opens a pdf
document such as the operating instructions.
Back Button – Returns to previous screen.
3.2 Main Menu
On start up the main menu is displayed. All functions may be accessed
directly via the touchscreen. Return to the previous menu by pressing the
back button or the return icon (arrow) at the top left of the touchscreen.
Measurement:
Application specific measurement screen.
Settings:
For application specific settings.
Explorer:
File manager functionality for reviewing measure-
ments saved on the instrument.
System:
For system settings, eg. language, display options,
power saving
Information:
For device information and operating instructions.
Exit:
Power Off.
3.3 Settings
Scroll up and down the screen by dragging your finger up or down the
screen. The current setting is displayed on the right hand side. Tap on an
item to adjust it.
Transducer
Connected Transducer
If a Pulse Echo Transducer is connected this will be recognized automatically.
Test Transducer
Each individual dry contact transducer can be tested for correct func-
tionality.
The graphic on the right hand side of the screen indicates which trans-
ducer pair is to be tested (blue highlight). Press the Pulse Echo Contact
Tester (E) onto the transducer pair as shown.
A successful test is indicated by the
transducer pair being highlighted green.
The next pair to be tested is then high-
lighted blue.
Continue until each transducer pair has
been tested.
If one contact pair fails the test, it may
be repeated before continuing.
A-Scan Analysis
Echo Tracking
This is particularly useful if a quick read-out of slab thickness is desired.
For complex objects containing internal defects, pipes and rebars it is
recommended to perform a complete B-Scan for analysis of the object.
Enable Gate
The gate function is used to search for the correct echo in a specific sec-
tion of the A-Scan. It is used in the measurement modes Distance, Pulse
Velocity and Area Scan. See chapter “3.5 Measurement Modes”.
Filter
Filters are used to filter out unwanted noise, to make it easier to identify
the correct echo.
