PROception PRODMHD11, Руководство по установке и настройке

Страница: 6 / 21

PRODMHD11 Manual V1.1
6
INSTALLATION
System Installer must adhere to Article 820-40 of the NEC that provides guidelines for proper
grounding and specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible
.
UNPACKING and INSPECTION
Each unit is shipped factory tested. Ensure all items are removed from the container prior to discarding any packing
material.
Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls. If there is any
sign of damage to the unit or damaged or loose connectors contact your distributor immediately. Do not put the
equipment into service if there is any indication of defect or damage.
HARDWARE INSTALLATION and CONNECTIONS
1. Use a HDMI cable to connect the video source (e.g., CATV, DVD, VCR, Camera) to the unit’s HDMI
IN
port. It is highly recommended that quality HDMI cable be used for all video source
connections.
2.
Use a HDMI cable to connect the unit’s
HDMI OUT
port to a television. Or use a quality 75Ω coaxial
cable with “F” connectors from the unit’s RF OUT jack to the distribution system (combiner or
reverse splitter) or directly to a television.
3. Connect the included power supply to the unit’s DC 12V POWER jack.
4. Connect the power supply to an appropriately rated AC power outlet.
5. Use a quality RJ45 cable to connect the Web Management port to a computer RJ45 port for
setup/manage the unit.
6. Connect the included adapter to the unit's DC 12V Power plug.
7. Connect the adapter to an appropriately rated AC power outlet.