Procentec Atlas 101-800110, Руководство пользователя

Страница: 28 / 58

© PROCENTEC
28/58
Where Effects of ignoring device errors
Device details Errors are still visible in the device details except for firmware differences.
Device List
• When a device is ignored they receive a check in the Ignore column
• All errors and warnings of the device are hidden
Notifications
•
New errors will not be shown
•
Old errors will be removed from the dropdown under the bell. This
potentially means that the bell can go back to green
• Errors of ignored devices will still show up in CSV export of the
Notifications
Q-Factor
•
Devices will be marked as ignored
• Errors will no longer influence the Q-Factor of the device. The device
will always have Q-Factor 5000 and therefor have no influence on the
overall Q-Factor of the network
Report The device will appear in the Ignored Device list in the report.
Topology
• Lost devices are still visible but the usual the red cross which indicates
that the device is lost, will be faded
• Double IP-addresses are ignored
• Firmware difference are ignored
• Link errors and warnings will not be shown if you ignore device errors
of the device causing the link errors
• A device with IP-address 0.0.0.0 will generate a warning. When ignoring
the errors of such a device, it will not generate errors anymore
• Devices which don’t supply correct SNMP data will show a blue NAMUR
icon. When ignoring the errors of such a device, this icon will disappear
Traffic Light Errors will no longer influence the traffic light (both on the Dashboard as on the
physical Atlas itself).
Device errors will still be visible in this device details view but will be hidden from the Device List and Topology,
and errors related to this device will not influence the Traffic Light or Q-Factor, or be displayed in the
notifications log. Ignored devices are labelled in the Q-Factor. Notifications which are generated by the device
are stored and downloadable as CSV but now shown.
Identification and Maintenance