background image

19

Important Safety Instructions

To get the best performance from your Proceed PDP 3, and for your safety, read and follow these important
safeguards.

1. Before operating the product, read all safety and operating instructions.

2. Keep all safety and operating instructions for future reference.

3. ALWAYS heed all warnings and cautions on the product and in the operating instructions.

4. ALWAYS follow all instructions for the operation and use of the product.

5. NEVER use the product near water (for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a

wet basement, near a swimming pool or spa, etc.).

6. Openings and slots in the cabinet of the product are provided to prevent it from overheating. NEVER place

the product in a location that will interfere with its proper ventilation.

7. NEVER place the product near heat sources such as radiators, fireplaces, stoves, or appliances that produce

heat. Avoid placing the product where it will be subject to direct sunlight or low temperatures.

8. The product should ONLY be connected to a power supply as specified on the rear panel.

9. The product is equipped with a two-wire AC line plug (one blade is wider than the other). NEVER defeat the

grounding or polarization of the power supply cord.

10. To prevent electric shock, NEVER use the product with an extension cord, adapter, receptacle, or outlet unless

the blades on the plug can be fully inserted; the blades should NEVER be exposed.

11. ALWAYS route the power supply cord so that it won’t be walked on or pinched by items placed on or against

it. Pay particular attention at outlets, plugs, and where the cord exits the product.

12. NEVER clean the product with solvents such as alcohol, gasoline, benzene, etc.

13. Before cleaning the product, ALWAYS disconnect the power supply cord. Use a soft cloth; if necessary,

dampen the cloth with plain water. NEVER apply water or any other cleaner directly to the cabinet.

14. ALWAYS take care that liquids are not spilled into the product, and make sure that objects, excessive dust,

and pet hair don’t enter the unit.

15. If the product won’t be used for a long period, ALWAYS unplug the power cord.

16. If you detect smoke or an abnormal smell, ALWAYS unplug the product from the power supply. Immediately

contact your Proceed dealer or the nearest Proceed service facility.

17. The product should ALWAYS be serviced by qualified service personnel when:

The power cord or plug has been damaged; or

Objects have fallen into the unit; or

Liquid has been spilled into the unit; or

The unit has been exposed to rain or water; or

The unit does not operate properly; or

The product has been dropped; or

The cabinet has been damaged.

18. NEVER attempt to service the product beyond what is described in this owner’s manual. All service should

be performed by qualified service personnel.

Содержание PDP 3





















Отзывы: