74
The Boundary Effect is particularly important when it comes time to position the
front speakers. If they are not placed consistently with regard to adjacent room
boundaries, the tonal balance or
timbre
of sounds panned across the front may
change, weakening the illusion of a real object moving across the soundstage. The
front Left, Center and Right speakers should be the same distance from the wall
behind them, and there should be approximate symmetry of the Left and Right
speakers with respect to their respective side walls.
room modes
Another acoustic property of concern is the concept of “room modes.” (These are
also sometimes called “standing waves.”) Bass frequencies have long wavelengths,
some of which are the same size as some dimension of the room itself. If the
sizes work out such that the reflection of the wave between two walls is in phase
with the original wave, that particular frequency will be overemphasized. Similarly,
some frequencies will very nearly cancel out in certain parts of the room, being
out of phase with each other. This effect is much worse in rooms in which two
or more dimensions (width and length, for instance) are even multiples of one
another, since the same frequencies are then being affected no matter which way
they turn. The result is wildly irregular bass response in various parts of the
room, resulting in either an unnatural, boomy quality or a thin, lifeless character
to the sound depending on where you sit.
All rooms have room modes, but you can ameliorate their effect greatly. In the
case of new construction, where you may have some latitude specifying the final
room dimensions, make sure that no two dimensions of the room are even mul-
tiples of each other. (Consult with your dealer for more information.)
Most of the time, you will not have the luxury of specifying where walls should
go. The next best thing (and something to be tried even when you
can
move
walls) is mid-bass diffusion. Break up the reflections between parallel surfaces
with large pieces of furniture or almost anything else. The worst sounding rooms
are the ones which are almost empty, since the standing waves can bounce back
and forth unimpeded.
Another strategy to be tried in minimizing the audibility of standing waves is
speaker placement. The placement of the speakers in any home theater system is
somewhat restricted by the need to have the sound closely associated with the
screen, which in turn must be in a location convenient to the seating area. But
sometimes moving a speaker a bit can make a noticeable difference in the
smoothness of the mid-bass response, due to changes in the room’s modes. For-
tunately, the subwoofers can be moved with relative freedom, since they normally
will not be localized as sources of sound. Experiment with an ear toward having
the smoothest bass response and the best “splice” or transition to the LCRs.
Of course, there are various acoustical treatments which can be utilized—ask
your dealer. There is also electronic equalization, but this is best done after every-
thing else has been optimized. Electronic EQ is best for providing the finishing
touches to a room, rather than for doing major surgery. And in all cases, elec-
tronic EQ should be done by a trained professional with equipment having
at
least
one-third octave resolution. Anything less than that is likely to introduce as
many problems as it solves.
Содержание Digital Surround Decoder
