PROCEED AMP2, Инструкция

Страница: 7 / 30

7
Operating Voltage
The Proceed AMP 2 and AMP 3 are factory-set for 100V, 120V, 220V, or 240V AC
mains operation at either 50 or 60Hz, according to the country for which the unit
was manufactured. (
230V in European Union countries, in compliance with CE
regulations. ) Make sure that the label on the bottom of the AMP indicates the
correct AC operating voltage for your location. The operating voltage cannot be
changed by the user, and any attempt to do so will void the warranty.
If the voltage indicated does not match the service in your area, see your Pro-
ceed dealer.
AMP bottom-panel label
WARNING: BEFORE ATTEMPTING TO OPERATE THIS DEVICE,
REFER TO OWNER’S MANUAL FOR PROPER OPERATING
INSTRUCTIONS AND SAFETY PRECAUTIONS. HAZARDOUS
VOLTAGE AVAILABLE INSIDE; DISCONNECT AC – MAINS
CABLE BEFORE OPENING UNIT.
d e s i g n e d a n d m a n u f a c t u re d i n U S A
MADRIGAL AUDIO LABORATORIES, INC.
No User Serviceable Components Inside.
For service, contact Madrigal Audio Laboratories or an Authorized
Dealer. Any modification to this equipment will void all warranties.
Manufactured under license from Lucasfilm Ltd. Additionally licensed under the following patents:
U.S. number 5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. Lucasfilm THX Audio,
Lucasfilm, and Home THX Cinema are registered trademarks of Lucasfilm Ltd.
amp
S/N
PR O C E E D
R