•
Keep extension cords and plugs in good working condition at all times and inspect them frequently for
signs of wear or damage.
•
Inspect the Wobblelight® power cord and plug frequently for signs of wear and do not use if
damaged.
•
DO NOT move, relocate or drag the Wobblelight® V2 by pulling on the power cord. The Wobblelight®
V2 should only be moved with the handle.
•
USE EXTREME CAUTION when hoisting the Wobblelight® V2. Carefully inspect the Wobblelight®
V2 housing, hoisting point and hoisting system to insure it is safe. Keep the area clear underneath
the Wobblelight® V2 being lifted. DO NOT hoist the Wobblelight® V2 by anything other than the
hoisting point.
•
DO NOT operate Wobblelight® V2 units with the protective dome and cap missing or broken. DO
NOT use Wobblelight® V2 units with a broken housing, broken lens or damaged power cord.
•
Take any damaged Wobblelight® V2 units out of service immediately. Replacement parts and/or
repair services are available from ProBuilt or a local authorized service center.
•
The Wobblelight® V2 is equipped with two redundant internal automatic high-temperature shut-off
devices. If a Wobblelight® V2 begins to cycle off and on by itself, this is an indication that these
shut-offs are tripping and the unit should be taken out of service immediately.
•
DO NOT operate Wobblelight® V2 units which have experienced a failure of the internal cooling fan.
The fan operation can be verified by the sounds of it running and by a stream of airflow exiting the
lens.
•
DO NOT attempt to remove or alter the Wobblelight® LED array.
•
Use only designated replacement parts of the appropriate type.
•
DO NOT expose Wobblelight® V2 to intense heat or sparks from welding slag, cutting torches, metal
saws, etc.
•
DO NOT expose Wobblelight® V2 to corrosive chemicals, excessive paint spray or abrasive blasting
materials.
•
Disassembly of Wobblelight® V2 will void the warranty. Contact ProBuilt or a local authorized service
center for repairs and replacement parts.
•
Receptacle to be used only for interlinking units
INSPECTION:
The Wobblelight® V2 is a high-performing specialty tool and therefore should be routinely inspected
to insure all units remain in proper working condition at all times.
Specific recommendations for routine inspection include the following:
1.
Assign all Wobblelight® V2 units to the tool crib to increase accountability and clarify responsibility for
maintaining the units in safe, working order.
2.
Allow only qualified electricians or other trained personnel to set up, inspect and maintain
Wobblelight® V2 units.
3.
Establish a regular schedule for cleaning and inspection for all Wobblelight® V2 units in service.
4.
When repairs are necessary, use only specified replacement parts. Contact ProBuilt or a local
authorized repair center.
5.
Take Wobblelight® V2 units out of service as they become damaged or abused to the point of having
questionable safety or integrity.
6.
Consider developing an internal safety procedure for use, inspection and maintenance of
Wobblelight® V2 units in accordance with the information contained herein and other site safety
requirements.
WARNING:
Deviation from these instructions may result in the increased risk of fire,
electric shock, injury to persons or property damage.
Pg 3
