Adjustments
15 / 25
5100.0018; 5100.0013
V4
GB
Meassure the outer dimension at the TAK-DP (1) with a qualified measuring tool (6) e.g. yard stick (or slide gauge).
These measure must be equal at the front side and back side (see
).
Figure 4
and
Figure 5
.
Tighten both nuts again (tight) on the outer side at the TAK-DP.
Figure 6
Figure 4
Figure 5
Figure 6
Figure A (roof profile)
Also a roof profile with different lengths of
aluminium profiles is preparable.
see
Figure A1
Figure A1
1 %
(1)
(6)
(6)
1 %
1 %
1 %
