6
Visit www.probrite.com/install for installation video tutorials and product support
INSTALLATION (CONTINUED)
3
REMOVE THE
MOUNTING PLATE
C
DD
D
NOTE: The mounting plate (D) comes
pre-assembled on the light fixture (A)
for shipping.
NOTE: The mounting plate set screw (C)
comes pre-installed on the light fixture.
☐
Remove the mounting plate (D) from
the back of the fixture by loosening
the mounting plate set screw (C)
using the hex head screwdriver (DD).
4
☐
For wall mount, the "TOP" arrow must
point upward.
☐
For eave mount, the "TOP" arrow must
point toward the building.
TIP: Only unscrew the set screw (C) far
enough to remove the mounting plate (D).
Do not fully remove the set screw (C).
AA
D
(fig 7).
(fig 6).
☐
Route the junction box wires through
the large center hole in the mounting
plate (D).
☐
Align the holes on the mounting plate
(D) with the holes of the junction box.
Use two #8 screws (AA) to attach the
mounting plate (D) to the junction box.
INSTALL THE
MOUNTING
PLATE TO THE
JUNCTION BOX
