Probrite STELLAR FSXD30-MS-4K-BZ, Инструкция по установке, использованию и уходу

Страница: 6 / 14

D
6
Visit www.probrite.com/install for installation video tutorials and product support
INSTALLATION (CONTINUED)
3
REMOVE THE
MOUNTING PLATE
NOTE: The mounting plate (D) come
pre-assembled on the light fixture (A) for shipping.
NOTE: The mounting plate set screw (C)
comes pre-installed on the light fixture.
☐
4
INSTALL THE
MOUNTING PLATE
☐
Route the junction box wires through
the large center hole in the mounting
plate bracket (D).
☐
Align the holes on the mounting plate
bracket (D) with the holes of the
junction box. Use two #8 screws (AA) to
attach the mounting plate bracket (D) to
the junction box
TIP: Only unscrew the tightening screw (C) far
enough to remove the mounting plate bracket (D).
Do not fully remove the set screw (C).
C
F
(fig 8).
Remove the mounting plate bracket (D)
from the back of the fixture by removing
the mounting screw cover plug (F) and
then loosening the mounting screw (C)
using a philips head screwdriver.
AA
D
(fig 9).