3
After mounting the Alpine Tower Slider, again
tighten the knob and properly secure it.
Secure the Properly Alpine tower slider with
the ratchet knob. Then attach the bowl plate
(Not Included)
to the Mitchell plate.
Attach the bowl plate
(Not Included)
to the
Mitchell plate to mount the bowl’s fluid head
(Not Included)
and then mount the camera on
the fluid head, as shown in the image.
Attach the Mitchell’s fluid head
(Not Included)
to the Mitchell plate.
NOTE: Its rugged design supports any camera/
fluid head combination up to 22.6. Multiple
3/8"-16
threaded
holes
for
mounting
accessories.
Secure with the castle nut after mounting the
fluid head as shown in the image.
To release the top plate of the fluid head,
press the side knob. Then match the camera’s
thread to the fluid head
(Not Included)
and
attach top plate of the fluid head to the
camera and then slide the camera to the fluid
head.
