4
•
To use 150mm Bowl Head with Dolly, add
150mm Bowl Receptacle.
•
To mount Mitchell base setups, remove the
100mm bowl receptacle from the dolly
platform & attach the mitchell plate to it.
Tighten screws using an allen key.
•
Mount your camera setup, as desired.
Attaching the Supports
•
Remove the hooks from the junior pin
adapters, insert them into the end feet on
both sides and attach the junior pin adapter
to the inserted hooks & tighten it by twisting
it.
•
Loosen the knob fixed on Junior Pin
Adapters, mount the track system onto any
stand
(Not Included)
via the adapters, and
tighten the knob back to secure it.
•
Remove the hook from the small junior pin
adapter and insert it into the support brack-
et, as shown in the image.
