3
Assembling the Dolly
Setup
•
Mount the Camera Dolly onto the track, as
shown.
•
Loosen & remove the center knob on both
sides of the dolly and attach the safety
wheels.
•
Next, re
-
attach & tighten the knobs.
•
Loosen the side knobs on both sides of the
dolly for tilting the camera platform. Adjust
the position at any angle and lock the knobs.
NOTE:
The dolly platform inclines up to 52°.
•
Attach elastic stoppers on both the rails to
perform as wheel brakes to prevent
dislocating the dolly.
NOTE:
Fusion Dolly accommodates 4 Camera Mounting Heads.
75mm Bowl / 100mm Bowl / 150mm Bowl / Mitchell Base
•
The top mount of the dolly comes equipped
with standard 100mm Bowl Receptacle.
•
Add 75mm Conversion Ring to use 75mm
Bowl Head with Dolly.
