2
Slide Central Post of Jib onto the Jib Stand
and tighten knob-2 to secure it.
Jib Stand
Setup
Open shank from central post. Leave the
black washers at one side
help of wrench.
Insert the section 4 inside central post then
Align holes of section with central post to
screw in the shank back.
Then tighten the bolt properly with the help
of a wrench, and to attach section 5 to 4,
loosen the bolt from section 4.
Knob 2
Jib Section
Setup
Section-5 has connecting bars attached with
section-4 on both ends and then tighten
them together using provided allen key.
