3
Continue the Arm build by sliding in section 3
onto section 4 as shown in the image.
Loosen the bolt from the connecting bar with
the help of a 6mm Allen key and wrench, and
then insert the bolt using the holes provided.
Then tighten them together using provided
allen key.
Continue the Arm build by sliding in section 2
onto section 3, and finally section 1 onto sec-
tion 2.
Connect the Wire/Cable Tensioner with
cable. Simply rotate the mid-section handle
to tighten the cable adding required amount
of strength to the system.
Connecting Bar
Tighten Bolt
Then tighten them together using provided
allen key. As shown in the image.
