Pro-Weld AG-805, Руководство по эксплуатации и обслуживанию

Страница: 9 / 20

3 0 0 -0 8 0 5
PRO WEL D
8. Don’t weld on containers which have held
combustible or flammable materials, or on ma-
terials which give off flammable or toxic va-
pors when heated.
9. Be sure to provide for proper ventilation
when welding in a confined area.
10. Never look at the electric arc without
wearing protective eye shields.
11. Always use the proper protective clothing,
gloves, etc.
12. Never strike an arc when near a bystander
who is unaware of the danger of ultraviolet
light to their eyes.
4.0 GENERAL DESCRIPTION
AG-805 LIGHT DUTY ARC GUN W/DAMPER
(Part No. 300-0805)
A shaped to the hand, semi automatic stud welding
tool. Welds any length stud with a diameter range of
12 gauge through 5/8 inches. Refer to figure 4-1 for
weight and size specifications.
5.0 UNPACKING
There is very little to do when unpacking your ARC
Stud Welding gun. Your Stud Welder comes com-
plete with all the accessories and tool required for
set-up, adjustment, and maintenance. Aside from the
correct chuck, ferrule grip, and any special accesso-
ries required for your application your ARC weld
gun is ready for hook-up to a Pro Weld power
source.
PAGE 2
Typical working weight gun plus
4 feet of unsupported 1/0 cables ..7 pounds
Shipping weight of gun plus
approximately 8 feet of
1/0 cable and connectors....... 11 pounds
Note: Chuck and ferrule grip are not standard
and must be ordered separately.
Figure 4-1 Standard AG-805 M.D. ARC Gun
1.0
10
6.1
6.6