4.3 RECEIVER ANTENNA POSTION
The sensitivity of the receiver antenna is similar to the transmitter antenna. The waves are received optimally on the
sides of the active part of the antenna (part measuring 30 mm at the end of the black extension measuring about 11 cm).
The active part of the antenna must be installed strictly straight and away from any electrically conductive element
(metal, carbon ...). Otherwise, the effect of "masking" occurs, greatly reducing the range.
4.4 WIRING THE RECEIVER
The receiver has 7 connectors. The connector marked
is intended for power supply. The 6 other connectors
marked
to are intend to be connected to the servos and ESC following :
4.5 RECEIVER POWER SUPPLY
The installation of the receiver and servos in the model deserves your attention. These materials are nominally designed
to operate with a supply voltage between 4.8 V and 8,4 V.
The power supply must be connected to the connector marked
on the receiver. It is essential to insert the power
connector in strict accordance with the position of the negative supply, spotted on the edge of the receiver. Any errors or
delays meaning a pin up or down can lead to immediate destruction of the receptor and / or servos connected to it.
The destruction caused by the receiver or offset reverse connection is not covered by warranty.
In practice, there are two main ways to feed the reception of a model. They differ mainly by the fact that the battery
powers the reception or on the contrary by the presence of a regulator.
2 CARACTERISTIQUES
4 OVERALL FEATURES
BAT
S
S
Strong.
Level of
emitted waves is
high.
W
Weak.
Level of
emitted waves is low.
S
W
S
Sensitive.
Level of received
waves is high.
W
Weak.
Level of
received waves is
low.
« EXTENSION » part
« ACTIVE »
Part
BAT
CH1
CH6
INDICATION
FONCTION
CH1
AILERON
CH2
PROFONDEUR
CH3
GAZ
CH4
DIRECTION
CH5
TRAIN
CH6
VOLET
BAT
ALIMENTATION
The marking on the edge of the receiver shows the connector pinouts.
It is imperative to respect strictly, otherwise destruction of the
receptor and / or servos may occur.
-
+
Negative
Positive
Signal
30
!
Содержание PTR-6A
Страница 1: ...MODE D EMPLOI RADIOCOMMANDE PTR 6A V 1 0 ...
Страница 22: ...22 ...
Страница 23: ...USER MANUAL PTR 6A Transmitter V 1 0 ...
Страница 44: ...44 ...