17
every shelter unit. For small holes worn out by little sands/sharp objects,
you may use the clear patch first, then cover it by blue patch.
Apply adhesive from the tube provided to BOTH surfaces, ensuring all
areas are adequately covered with glue. Leave for 2
–
3 minutes until
adhesive is “tacky” to the touch.
Stick the patch over the hole and apply pressure or heavy weight to both
surfaces.
Maintain pressure for several minutes, until adhesive is dry.
Once dry, inflate unit and check for leaks. If all possible, allow all patch
work to cure for at least 24 hours before fully re-inflating and using the
unit.
SEE DETAILS BELOW
SMALL TEARS, CUTS AND PUNCTURE REPAIRS
DESCRIPTION:
Use the enclosed repair kit for small punctures. Clean the fabric around
the area to be repaired using MEK or acetone, then re-clean as
before. Apply a coat of glue to the damaged part and to the patch
material, allowing it to dry for 2 - 3 minutes. It is strongly
recommended that all patch work be allowed to cure at least 24 hours
before re-inflating the unit.
Please repair the leak in a dry/clean environment. If the weather is too
wet, the glue may not be easy to dry.
LARGE REPAIRS OF BERMS AND SEAMS DESCRIPTION:
It is recommended that the air shelter/shower be returned to PRO-SAFE
or an authorized PRO-SAFE dealer for all large repairs.
