![background image](http://html.mh-extra.com/html/pro-point/8868127/8868127_manual_1607388006.webp)
8868127
Soldering and Rework Station
V1.0
6
For technical questions call 1-800-665-8685
7.1 Never remove the grounding prong or modify the plug in any
way, as this will render the tool unsafe.
7.2 Do not use any adapter plugs.
WARNING! All wiring should be performed by a qualified electrician.
POWER CORD
1. Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the
tool's power cord cannot reach a power supply from the work area.
2. Do not operate this tool if the power cord is frayed, damaged or
poorly spliced, as an electric shock may occur, resulting in personal
injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or other faults
in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than comfortably
warm while operating the tool.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
4.1 Do not pull on the cord to disconnect the plug from an outlet.
4.2 Keep the cord away from heat, oil, sharp edges or moving parts.
4.3 Never use the cord to carry the tool.
4.4 Place the electrical cord in a position that prevents it from
coming into contact with the tool and getting caught by the
workpiece. The cord should always stay behind the tool.
5. Make sure the cord is located so that it will not be stepped on,
tripped over or otherwise subjected to damage or stress.
6. Do not wrap the cord around the tool, as sharp edges may cut
insulation or cause cracks if wound too tight. Gently coil cord and
either hang on a hook or fasten with a device to keep cord together
during storage.
POWER TOOL PRECAUTIONS
1. DO NOT use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and could cause an injury. A qualified technician must repair and
verify the power tool is operating correctly before it can be used.