V1.0
Soldering and Rework Station
8868127
Visit www.princessauto.com for more information
5
9. Do not leave the tool unattended while the power is on. Turn the
tool off and wait for it to cool.
10. Press the nozzle onto the heat gun carefully so the nozzle is not
deformed. Do not use a tool such as pliers on the nozzle.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your
body that is wet or damp. Wet skin reduces resistance to electrical
current, increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug
is connected to a properly grounded receptacle.
1. Disconnect the tool from the power supply before making any
adjustments, changing accessories, cleaning, servicing or when
storing. Such preventive safety measures reduce the risk of starting
the tool accidentally.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is
an increased chance of electrical shock if your body is grounded.
3. Do not expose the tool to rain, snow, frost or any other damp or
wet conditions. Water entering a tool will increase the risk of
electric shock.
4. Do not disconnect the power cord in place of using the power
switch. This will prevent an accidental start-up when the power cord
is plugged into the power supply.
4.1 In the event of a power failure, turn off the machine as soon as
the power is interrupted. The possibility of accidental injury could
occur if the power returns and the unit is not switched off.
5. Do not alter any parts of the tool or accessories. All parts and
accessories are designed with built-in safety features that may be
compromised if altered.
6. Make certain the power source conforms to requirements of your
equipment (see Specifications).
7. This tool is only for use on 120 V (single phase) and is equipped
with a three-prong grounded power supply cord and plug. Check
with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. If the tool should electronically
malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
