V 1.1
8712945
Please read and understand all instructions before use. Retain this manual for future reference.
SPECIFICATIONS
Horsepower
2 HP
Full Load Speed
1,750 RPM
Rating (Voltage, Current, Frequency)
120V, 10A, 60Hz
Watts
1,500W
Motor Phase(s)
1
Full Load Torque
6.27 ft-lb
Locked Motor Torque
16.49 ft-lb
Belt Pulley
A940 (940 mm)
Insulation Type
F
Service Factor
1
Shaft Diameter
0.63 in.
Frame Type
Cast Iron
Rotation Direction (when facing the shaft)
Reversible
Totally Enclosed Housing
Yes
Open Drip Proof Housing
No
Auto Overload Protection
No
Manual Overload Protection
Yes
INTRODUCTION
The single phase, duel-value capacitor motor is totally enclosed to protect the mechanism from
contaminants. The motor plugs into a 120V outlet.
Please consult the Rolling Pipe Bender Machine manual (SKU 8712945) before starting the
machine. The safety and operation instructions in that manual also apply to this manual.
SAFETY
WARNING! Read and understand all instructions before using this device. The operator must
follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance
instructions.
SPECIFIC SAFETY PRECAUTIONS
DANGER! Only qualified personnel, trained in the safe installation and operation of this
equipment, should install this motor. When improperly installed or used, rotating equipment
can cause serious or fatal injury.
Before you install, operate or perform maintenance, become familiar with the following:
• NEMA Publication MG-2: Safety Standard for Construction and Guide for Selection,
Installation and Use of Electric Motors.
• IEC 60072-1 Electrical and IEC72-1 Mechanical specifications ANSI C51.5
• The Canadian Electrical Code (CE) and local codes and practices.
• OSHA standard 1910.147 titled: The Control of Hazardous energy (lockout/tag-out).
MOTOR FOR ROLLING PIPE
BENDER MACHINE SKU 8712945
Содержание 8712945
