V1.0
ROLLING PIPE BENDER MACHINE
8712945
Visit www.princessauto.com for more information
3
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards
Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection for the eyes. Eye
protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1 standards based on
the type of work performed.
2. Wear the appropriate type of full-face shield in addition to safety googles, as the work can
create chips, abrasive or particulate matter.
3. Wear gloves that provide protection based on the work materials or to reduce the effects of
tool vibration.
a. Do not wear gloves when operating a tool that can snag the material and pull the hand
into the tool.
4. Wear protective clothing designed for the work environment and tool.
5. Non-skid footwear is recommended to maintain footing and balance in the work environment.
6. Wear steel toe footwear or steel toe caps to prevent a foot injury from falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid personal injury or
damage to tool.
1. Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the moving parts of a
tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance enables better control
in unexpected situations.
4. Keep hands away from the rollers when the machine is operating to avoid a crushing injury.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from repeated use)
replace strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific function. Do not
modify or alter this tool or use it for an unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced. Repair or replace the parts.
3. Never attempt to bend a tube that exceeds the max. bending thickness (see Pipe/Tube
Thickness Chart).
4. The outside pipe diameter must fit the groove in all three rollers. A mismatch may damage
the rollers or pipe when under pressure.
5. Make sure a pipe’s weld seam is not at the bending point. This can damage the pipe and/or
the rollers.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing part before
operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make sure that
all items in the contents are included.
Содержание 8712945
