V1.0
ROLLING PIPE BENDER MACHINE
8712945
Visit www.princessauto.com for more information
5
• Pause stops the drive rollers. Select this and wait several seconds before changing roller
direction.
9. Turn the adjustable screw clockwise to increase the depth of the bend. This can be done
while pause or during the bend.
10. Increase the bend depth in small increments and continue to pass the pipe back and forth
through the rollers. Apply slow, gradual pressure to the pipe until it has reached the correct
bend angle.
11. Select Pause, then release the pipe by unscrewing the adjustable screw.
12. Unplug the machine after finishing the work.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will
have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord periodically. Have damaged
or worn components repaired or replaced by an authorized technician. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important information. If unreadable or
missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An improperly repaired
tool may present a hazard to the user and/or others.
LUBRICATION
Inspect and lubricate the tool when required. Only use light oil to lubricate the tool. Other
lubricants may not be suitable and could damage the tool or cause a malfunction during use.
Lubricate the adjustment screw, screw bolt, chain and axis bearing with machine oil.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to
avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for electronic devices,
batteries, oil or other toxic liquids
.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function properly or parts
are missing. If unable to do so, have a qualified technician service the tool.
Содержание 8712945
