8616484
THERMAL IMAGER
V1.1
6
For technical questions call 1-800-665-8685
Power
off
The default setting is ‘Auto off 1 min’. You can select
other default values: 5, 10, 20 minutes or ‘No auto off’.
Manually powering off the device by pressing the mode
key (F) for three seconds.
Backlight Selectable three levels of brightness.
Set time
Set the date and time in:
MM/DD/YYYY (month/day/year); and
HH/MM/SS (hour/minute/second) formats.
Time
stamp
Turn on Time stamp to save thermal images with a real-
time stamp.
Turn off Time stamp to hide the date and time on
stored thermal images.
Erase file Select All picture! To clear all stored thermal images.
Select All movie! To clear all stored videos.
Save
mode
Select Picture to save thermal images in image mode
(BMP and Excel formats).
Select Movie to save thermal images in video mode.
Noise
filter
Turn on Filter to reduce noise in an image.
Turn off Filter to display real image noise.
OPERATION
1. Turn the device on by pressing the trigger (J).
NOTICE! Do not point the imager at high temperature sources
when turning the device on.
2. After turning the power on, simply
aim the thermal imager camera at the
measure target with lens (I) and get
the thermal image and temperature
immediately. Make sure the target
area is within the field of view.
There are three cursors on the
screen. The main cursor shows the
temperature of the object located in
the middle of the screen. The other
two moving cursors indicates the
highest and lowest temperatures in
the thermal image (Fig. 2).
Fig. 2