![background image](http://html.mh-extra.com/html/pro-point/8510851/8510851_user-manual_1607422005.webp)
V1.3
Variable Shade Auto-Darkening Welding Helmet
8510851
4.
The auto-darkening welding filter should always be used with
original inner and outer cover lenses. Never open or tamper with
the filter cartridge.
5.
Ensure the front cover lens is mounted before use and remove
protective film.
6.
Ensure that the lens is clean and there is no dirt or spatter
covering the 4 sensors at the front of the filter cartridge.
7.
Inspect all parts for signs of wear or damage. Any scratched or
cracked parts should be replaced prior to use.
8.
Never place the helmet on a hot surface.
9.
Arc rays can burn both eyes and skin. Arc welding produces
intense visible and invisible (ultraviolet and infrared) rays. Wear a
welding helmet fitted with the proper shade to protect your face
and eyes when welding or watching.
10.
Check whether welding or grinding mode is chosen before use.
11.
The reaction of the Filter’s liquid crystal will be slower if
the ambient temperature is low, but it will not affect protective
functions.
12.
Replace the protective lenses immediately if broken or
scratched. The damage will obscure vision and reduce the filter’s
protective performance.
13.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
PARTS IDENTIFICATION
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the parts list are included.
Contents:
•
Welding Helmet Shell
•
Cartridge Filter
•
Internal and External Lenses
•
Headgear
•
Battery x 2
Visit www.princessauto.com for more information
5