V1.3
Variable Shade Auto-Darkening Welding Helmet
8510851
INTRODUCTION
The filter cartridge in the Variable Shade Auto-Darkening Welding
Helmet is designed for arc welding or cutting applications, including
hand welding, gas protected welding, argon arc welding and
plasma cutting.
The solar auto-darkening filter employs photoelectric sensors that cause
the liquid crystal to change from the bright state to dark state as soon
as it receives arc light. The state changes from dark to bright shortly
after the welding is finished. The delay is to protect the eyes and face
from harmful infrared or ultraviolet radiation.
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
WARNING!
This notice indicates a specific hazard or unsafe practice
that could result in severe personal injury or death if the
proper precautions are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe
practice will result in equipment or property damage, but
not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well lit and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment
away from the work area.
Visit www.princessauto.com for more information
3